Caution, Peration, Height adjustment – Bissell 89Q9 User Manual

Page 7: Special tools

Advertising
background image

7

Height adjustment

There are seven height settings available for

various floor surfaces. Turn the dial on the foot of

the cleaner to the desired setting.
Lowest setting – for low pile carpet or bare

floors. To pick up debris it may be necessary to

move up one setting.
Medium settings – for medium pile carpet.
high setting – for high pile and most shag carpet.

note: for optimal carpet cleaning

performance, adjust to the lowest practical

setting. If your cleaner is difficult to push,

adjust to the next higher setting.

If the dial is difficult to turn, tilt the cleaner

back slightly to take the weight off the foot while

turning.

Special tools

your vacuum is not only a powerful floor vacuum

cleaner, it’s also a versatile stairs and above floor

vacuum when you select one of the special tools.

note: The tools can be used with the

vacuum in the Upright Position or with the

Detachable Canister.

1. Detach the vacuum hose by grasping the

hose grip and lifting to separate from the

hose grip base.

2. Attach tools by firmly pushing onto vacuum

hose or telescoping extension wand.

Combination dusting brush/upholstery tool:

Two types of cleaning tools are included in one

attachment. Rotate for desired tool.

Use brush side to dust furniture, blinds, books,

lamps, shelves, and baseboards.

Use upholstery side for curtains, draperies,

cushions, fabrics.

Crevice tool:

Use in tight narrow spaces.
Telescoping extension wand:

Use with desired attachment for a longer reach. To

extend the wand, twist the collar to “Unlock” posi-

tion and push away from you. Twist the collar to the

“Lock” position to lock into place. To retract, twist to

unlock, pull toward you and twist to relock.

O

peration

Tip:

Before cleaning under

low furniture, check

area first for objects

that might harm the

unit or block the

Vacuum Hose.

CAUTIOn:

Always place vacuum cleaner on

floor in its fully Upright Position

and make sure it is locked into

place before removing Canister

or when using tools. Placing the

Lift-Off in its full Upright Position

automatically stops the

rotating brush.

1.

w w w . b i s s e l l . c o m

Advertising