Philips Mando a distancia universal - Manual (Page 3)

Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
Programming Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Learn a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Switching backlighting on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Reset a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Copy a device mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Reset all functions in a device mode . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Assign Volume control to another mode . . . . . . . . . . . . . . . . . . . . . . . . . 11
Restoring all original functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . 121-145
Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
1. Introduction
Congratulations on your purchase of the Philips SRU 7060 universal remote
control. After installing the remote control you can operate a maximum of 6
different appliances with it:
TV, DVD player/recorder, STB (settop box, satellite tuner/cable decoder),
AMP (amplifier/receiver),VCR and CD player/recorder.
You can find information about how to prepare this remote control for use in
the chapter ‘Installing the remote control’.
2. Installing the remote control
Inserting the batteries
1
Press the cover inwards and slide it in the
direction of the arrow.
2
Place two AA type batteries into the battery
compartment, as shown.
3
Slide the cover back and click it firmly into place.
Testing the remote control
The remote control has been programmed to operate most Philips
appliances. Because the SRU 7060 may use different signals for each brand
and even for different models of the same brand, it is advisable to test
whether your appliance responds to the SRU 7060.
The example below (TV) instructs you how to do this.
You can repeat the same steps for other appliances (DVD,VCR, etc.) which
you want to operate using the SRU 7060.
Example of TV:
1
Turn your TV on manually or use the original remote control.
Tune to channel 1.
3
Instructions for use
English