Blaupunkt MP34 - Manual (Page 14)

14
Note:
The unit will remain off if the ignition is
off. To turn it on and play the inserted
CD, press buton
2 once.
● If a CD is already inserted in the
drive and the unit is playing Radio
or CD Changer (AUX) mode.
➮
Keep pressing the SRC button :
until “CD” appears in the display.
Playback begins from the point at which
it was last interrupted.
Selecting tracks
➮
Press one of the arrow buttons
7
to select the next or previous track.
If you press the fi or @ button 7 once,
the current track will be played again
from the beginning.
Fast searching (audible)
To fast search backwards or forwards,
➮
keep one of the @ # buttons 7
pressed until fast reversing / fast
forwarding begins.
Random play (MIX)
➮
Press button 5 MIX 9.
“MIX CD” appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
Stopping MIX
➮
Press button 5 MIX
9 again.
“MIX OFF” appears briefly in the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can briefly play all the tracks on a
CD.
➮
Press the MENU button
8 for
longer than two seconds. The next
track will then be played for
scantime as set in the “Setting the
scantime”.
Note:
● You can set the scantime. For fur-
ther details, please read the sec-
tion entitled “Setting the scantime”
in the “Radio mode” chapter.
Stopping SCAN and continuing
playback
➮
To stop scanning, press the MENU
button
8.
The current track will then continue to
be played.
Repeating tracks (REPEAT)
➮
If you want to repeat a track, press
button 4 RPT
9.
“RPT TRCK” appears briefly in the
display and the RPT symbol lights up.
The track is repeated until you
deactivate RPT.
Cancelling repeat
➮
If you want to stop the repeat
function, press button 4 RPT
9
again.
“RPT OFF” appears briefly in the display
and the RPT symbol disappears.
Normal playback is then continued.
CD MODE
BA Bahamas/Monte Carlo MP34_EN 13/11/03, 8:59 14