Blaupunkt MP34 - Manual (Page 20)

20
Changing the display
5 options are available:
● Track number and play time
● Track number and clock
● CD number and track number
● CD number and clock
● CD number and play time
➮
Press the button
6 once or
several times for longer than two
seconds until the required display
appears.
Repeating individual tracks or
whole CDs (REPEAT)
➮
If you wish to repeat the current track,
briefly press button 4 RPT
9.
“RPT TRCK” appears briefly and RPT
lights up in the display.
➮
If you wish to repeat the current
CD, press button 4 RPT
9 longer
than two seconds.
“RPT DISC” appears briefly and RPT
lights up in the display.
Cancelling repeat
➮
If you want to stop the repeat
function for the current track or CD,
press button 4 RPT
9 briefly and
“RPT OFF” appears briefly in the
display and RPT disappears.
Random play (MIX)
➮
To play all the tracks on the current
CD in random order, briefly press
button 5 MIX
9.
“MIX CD” appears briefly and MIX lights
up in the display.
➮
To play the tracks on all the
inserted CDs in random order,
CD CHANGER MODE
press button 5 MIX 9 longer than
two seconds.
“MIX ALL” appears briefly and MIX lights
up in the display.
Stopping MIX
➮
Press button 5 MIX 9 briefly and
“MIX OFF” appears briefly in the
display and MIX disappears.
Scanning all tracks on all CDs
(SCAN)
➮
To briefly play all the tracks on all
inserted CDs in ascending order,
press the MENU button
8 for
longer than two seconds.
“TRK SCAN” appears briefly follows by
blinking the track number of the CD
track being scanned.
Stopping SCAN
➮
To stop scanning, briefly press the
MENU button
8.
The current track will then continue to
be played.
Note:
● You can set the scantime. For
further details, please read the
section entitled “Setting the
scantime” in the “Radio mode”
chapter.
Pausing playback (PAUSE)
➮
Press button 3 E E E E E 9.
“PAUSE” appears in the display.
Cancelling pause
➮
Press button 3 E E E E E 9 while in
pause mode.
Playback is continued.
BA Bahamas/Monte Carlo MP34_EN 13/11/03, 8:59 20