Briggs & Stratton 1695354 - Manual (Page 11)

9
Assembly
Figure 9. Install Handle to Tube
A. Handle
B. Locknuts, KEPS, 1/4-20
C. Screw, Slotted, 1/4-20 x 1/2
D. Screw, Slotted, 1/4-20 x 1
E. Strap, Rubber
F. Locknut, Center Lock, 1/4-20
B
D
B
F
A
E
C
INSTALL HANDLE TO TUBE
1. Install handle (A, Figure 9) using 1/4-20 x 1/2
screw and 1/4-20 locknut (B) for rear hole. Use
1/4-20 x 1 screw (D) as shown. Tighten hardware.
2. Install strap (E) to screw (D) securing with 1/4-20
locknut (F).