Sony UP-D55 - Manual (Page 10)

Op
er
at
ion
Before Printing
10
3
Detach the spent ink ribbon from the ink ribbon
holder.
4
Load the new ink ribbon into the ink ribbon holder.
1 Holding the ink ribbon firmly, remove the gear
cover.
2 Place the ink ribbon with the white gear as
illustrated.
3 Place the ink ribbon with the gray gear in the
same way as explained in step 2.
4 Eliminate any slack in the ribbon by turning the
gears.
Pushing the ink ribbon spool that takes up the ink
ribbon in the direction of the arrow, remove the
spool from the side with the gray gear.
Pushing the ink ribbon spool that sends the ink
ribbon in the direction of the arrow, remove the
spool from the side with the white gear.
Gear cover
To avoid dropping the ink ribbon, make
sure that you hold it firmly.
2 Press the other side of the ink ribbon
until you hear it click into place.
1 Press the white gear of
the ink ribbon.
Match the color of the
gear of the ink ribbon
spool and the color of the
ink ribbon holder.
1 Press the gray gear of
the ink ribbon.
2 Press the other side of the ink ribbon
until you hear it click into place.