Sony UP-D55 - Manual (Page 14)

Op
er
at
ion
Printing
14
being printed when you opened the ribbon door is
ejected and the printer turns to the standby mode.
• You can make multiple copies of identical printouts.
However, the printer may stop printing due to warping
of the printed sheet and the ALARM indicator lights.
In such a case, remove the printouts accumulated on
the paper tray. The printer will start to print the
remaining copies automatically.
• Do not leave more than 10 sheets of ejected printouts
on the paper tray. Doing so may cause a paper jam.
If the printer does not print
The printer will fail to print when the ALARM, PAPER,
and/or RIBBON indicator light.
For details, see “Indicators on the Ribbon Door” on page
18.
If the paper or ink ribbon runs out during
printing
The printer stops the printing operation.
Load the paper into the paper tray and the ink ribbon.
Printing of remaining copies is automatically started.
To stop the printing multiple copies of identical
printouts
Press the STOP button. The printer finishes current
printing and ejects it. Then, it turns in standby mode.
When storing your printouts
• Avoid storing the printout in a location subject to high
temperatures, high humidity, excessive dust and direct
sunlight.
• Do not stick tape on a printout. Also, avoid leaving a
plastic eraser on a printout or placing a printout in
contact with materials which contain plasticizer
(under a desk mat, for example).