Brother HL-5470DWT - Manual (Page 9)

3
Printing Methods
1
Paper capacity of the paper trays
1
1 Folio size is 8.5 in. × 13 in. (215.9 mm x 330.2 mm).
2 250 sheets for HL-5470DW(T), 500 sheets for HL-6180DW(T)
3 Tray 2 is standard on HL-5470DWT and HL-6180DWT.
Recommended paper specifications
1
The following paper specifications are suitable for this machine.
 Use paper that is made for plain-paper copying.
 Use paper that is 20 to 24 lb (75 to 90 g/m 2 ).
 Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
 This machine can use recycled paper that meets DIN 19309 specifications.
(To help you choose which paper to use with this machine, see Important information for choosing your paper
uu
page 165.)
Paper size Paper types No. of sheets
Paper Tray
(Tray 1) Letter, A4, Legal,
B5 (ISO/JIS), Executive, A5,
A5 (Long Edge), A6,
B6 (ISO), Folio
1
Plain paper, Thin paper and
Recycled paper up to 250 sheets
20 lb (80 g/m
2
)
2
up to 500 sheets
20 lb (80 g/m
2 ) 2
Multi-purpose Tray
(MP Tray) Width: 3 to 8.5 in.
(76.2 to 215.9 mm)
Length: 5 to 14 in.
(127 to 355.6 mm)
Plain paper, Thin paper,
Thick paper, Thicker paper,
Bond paper, Recycled paper,
Envelopes and Labels 50 sheets
20 lb (80 g/m
2
)
3 Envelopes
Optional Lower Tray
(Tray 2)
3
Letter, A4, Legal,
B5 (ISO/JIS), Executive, A5,
B6 (ISO), Folio
1
Plain paper, Thin paper and
Recycled paper up to 500 sheets
20 lb (80 g/m
2
)
Basis weight 20-24 lb (75-90 g/m 2 )
Thickness 80-110 μm
Roughness Higher than 20 sec.
Stiffness 90-150 cm 3 /100
Grain direction Long grain
Volume resistivity 10e 9 -10e 11 ohm
Surface resistivity 10e 9 -10e 12 ohm-cm
Filler CaCO
3
(Neutral)
Ash content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%