Bissell 90Y5 - Manual (Page 9)

w w w . b i s s e l l . c o m
9
M
aintenance and care
CAUTION:
Upright storage of the Steam
Mop with a wet mop pad may
result in the formation of white
marks on your floor. To remove
the white marks, clean area
with vinegar.
Tip:
Using distilled or
demineralized water will
maximize the performance
of your filter.
Tip:
Be sure to use only a
BISSELL water filter in your
Steam Mop.
When you're done
1. Unplug power cord from outlet.
2. Carefully remove mop pad from swivel
head, as mop pad and lower assembly
will be hot.
3. Any water remaining in the water tank
should be emptied prior to machine storage.
4. Mop pad can be machine washed in
warm water. Use only liquid detergants.
Do not use bleach or fabric softeners, For
best results, air dry.
5. Wrap power cord around quick release
cord wrap on side of Healthy Home
Steam Mop Max.
6. Wipe all surfaces of Healthy Home
Steam Mop Max with a soft cloth. Store
upright in a protected, dry area.
NOTE: If steam output is reduced, the
nozzle may be blocked. To
remedy, unplug unit and allow to
cool. Once cooled, remove swivel
head from lower body and pour vin-
egar through center tube of swivel
head “neck”. Clear nozzle by insert-
ing a paper clip into the brass spray
tip located in bottom of lower body.
If you fill your Healthy Home Steam
Mop Max cleaner with normal tap
water, it is essential to check the water
purification system and replace it when
it is no longer effective. Change the
filter when the bright green grains turn
blue. If the filter is not changed at the
appropriate time, calcium deposits will
accumulate on the heating element,
causing damage or reduced
performance.
Using distilled or demineralized water
will maximize the performance of your
filter.
To order a replacement water
purification system refer to the
replacement parts section on page 10.
Brass Spray Tip
Swivel Head Neck
Replacing the water purification system