Philips EnergyLight - Manual (Page 9)

cleaning
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
Do not let water run into the appliance or spill water onto the appliance (Fig. 5).
1 Unplug the appliance and let it cool down before you start to clean it.
 Clean the outside of the appliance with a damp cloth (Fig. 6).
replacement
Except for the tube lamps, the appliance does not contain any serviceable parts. The tube lamps
have to be replaced when they stop burning or after a period of 10,000 burning hours (i.e. after
many years of normal use). The tube lamps must be replaced with original Philips EnergyLight PL-L
36W tube lamps. Only these lamps provide the correct light intensity.
Have the tube lamps replaced by a service centre authorised by Philips. Only they have the
knowledge and skills required for this job and the original spare parts for the appliance.
Environment
Tube lamps contain substances that may pollute the environment. Always remove the tube
lamps before you discard and hand in the appliance at an official collection point. Dispose of the
tube lamps at an official collection point for chemical waste.
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 7).
guarantee & service
If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone
number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.
-
-
EnglisH 9