Belkin F1DD104U EN - Manual (Page 16)

STEP-BY-STEP INSTALLATION GUIDE
14
3. Using the audio cable, connect one end of the male 3.5mm plug to
the “Speaker Out” jack of your sound card or computer, and connect
the other end of the “audio” jack to your KVM Switch.
4. Using a second audio cable, connect one end of the male 3.5mm plug
to the “Mic Out” jack of your sound card or computer, and connect the
other end of the “mic” jack to your KVM Switch.
Powering Up the Systems
Once all cables have been connected, turn on all CPUs that are attached
to the KVM Switch. All computers can be powered on simultaneously. Your
KVM Switch should be ready for use.