Belkin F1DD104U EN - Manual (Page 5)

3
OVERVIEW
Direct-Access Port Selectors
Direct-access port selectors, conveniently located on the front face of the
KVM Switch, allow for simple, manual port selection.
Cable Management
The designed enclosure offers built-in cable management to contain
connected cables. Once the cables have been connected and the shroud
slid into place, the cables are conveniently maintained through the
back opening.
LED Display
An LED display is added to the face of the KVM Switch for easy status
monitoring. A lit LED indicates which computer the console has control
of. The corresponding direct-access port selector is located next to the
LED. When pushed, the LED should light next to the port selector.
USB Device Ports
Two USB device ports allow you to add shared peripherals. This reduces
cable clutter and eliminates the need to disconnect and reconnect
devices when switching between computers.