Selecting one-point mark patterns, Selecting one-point patterns, Example – Brother PE 150 User Manual
Page 40
Advertising
37
Selecting one-point mark patterns
Example
1. Touch “ ”.
2. Select the desired pattern to be embroidered.
(Example: Touch the giraffe)
1
Touch this key to display all available patterns
on the screen. You can then select the
desired pattern by touching it.
2
Touch this key to return to the previous
pattern screen.
3
Touch this key to move to the next pattern
screen.
3. The pattern is now selected.
4
Screen A – The operation of each key shown
on this screen is described on the
following page.
1
2
3
4
Advertising