Bissell 3512 - Manual (Page 13)

7
WARNING:
The Rotating
Floor Brush continues to rotate
while tools are in use. To reduce
the risk of injury from moving
parts, always move the cleaner
using the handle. Always place
vacuum cleaner on floor with
Handle in Upright position
when using tools.
Never place your fingers under
the cleaner when it is running.
Never place Powerfoot on
furniture, or place vacuum
cleaner close enough to objects
to pull them into rotating brush.
Special Tools
Tip:
Hair, string and
small objects
can block the
Vacuum Hose or
Tools. Check
them occasionally
for obstructions.
See Trouble-
shooting Guide
for instructions.
Slide Cleaning Selector to Floor to divert the suction back
to the Powerfoot.
Vacuum Hose must be left in place. For maximum
cleaning performance.
1.
2.
To Resume Normal Floor Vacuuming
Raise Handle to Upright Position.
Make sure Vacuum Hose is securely inserted in Hose Port (turn
clockwise to lock).
Slide Cleaning Selector to Tool setting to divert all suction
to Hose.
Attach tools by firmly pushing/twisting onto Vacuum Hose
or Wand.
■ Dusting Brush - Slide onto Upholstery tool as shown. For
dusting surfaces such as table tops, mantles, lamp shades,
drapes, woodwork, etc.
■ Upholstery Tool - Use with or without Dusting Brush for
upholstery or stairs.
■ Extension Wand-
For extra length or reach. Use with one of the two
other tools.
■ Crevice tool -
For tight, narrow spaces.
1.
2.
Your Upright Vacuum Cleaner is not only a powerful carpet,
bare floor, and rug vacuum cleaner, it’s also a versatile above
floor vacuum cleaner when you select one of the three special
on board tools stored on the Tool Rack.
3.
4.
2
3
Upholstery Tool
Extension Wand
Crevice Tool
Dusting Brush