Blaupunkt PALM BEACH C51 - Manual (Page 12)

39
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Setting the Station
There are a number of ways to set the
station.
Automatic station search
➮
Press the or button,
:
.
The next station that can be received is
tuned in.
Manual station tuning
You can also tune to the station manu-
ally.
➮
Press the or button,
:
.
Note:
●
Manual station tuning is only possi-
ble if the RDS convenience func-
tion is deactivated.
Browsing a chain of stations
(FM only)
If a station is providing several programs
it is possible to browse through this
“chain” of stations.
➮
Press the or button,
:
, in or-
der to change to the next link in the
station chain.
Note:
●
In order to use this function, the
RDS convenience function must be
active.
You can only change in this way to a
station that you have already received
at least once. Use the Scan or Travel-
store function for this purpose.
Adjusting the Sensitivity of the
Station Search
You can choose whether to search only
for stations with strong signals, or wheth-
er weak stations should be included.
➮
Press the MENU button,
8
.
➮
Press the or button,
:
, as
often as is necessary for “SENS” to
appear in the display.
➮
Press the button,
:
.
The current value of the sensitivity is
shown on the display. “SENS HI6” indi-
cates maximum sensitivity, and “SENS
LO1” the lowest. If “SENS LO” is cho-
sen, lo appears in the display.
➮
Adjust the desired sensitivity with
the or key,
:
.
➮
When the setting process is com-
plete, press the MENU button,
8
,
or OK,
;
.
Saving a Station
Saving a Station Manually
➮
Choose the desired memory level
from FM1, FM2, FMT or one of the
other wavebands, MW or LW.
➮
Tune to the station you want.
➮
Choose one of the station buttons
1 - 6,
>
, on which you want to
store the station, and hold it
pressed for longer than two sec-
onds.
RADIO OPERATION