Traffic information, Adjusting the volume for traffic announcements, Switching traffic information priority on and off – Blaupunkt PALM BEACH C51 User Manual

Page 16

Advertising
background image

43

ENGLISH

DEUTSCH

FRANÇAIS

IT

ALIANO

NEDERLANDS

SVENSKA

ESP

AÑOL

PORTUGUÊS

Adjusting the Volume for Traffic
Announcements

➮

Press the MENU button,

8

.

➮

Press the or

button,

:

, until

“TA VOLUME” appears in the dis-
play.

➮

Adjust the volume with the
buttons,

:

.

➮

When the setting process is com-
plete, press the MENU button,

8

,

or OK,

;

.

Note:

●

During a traffic announcement you
can adjust the volume for the dura-
tion of the announcement using the
volume control,

2

.

Note:

●

You can adjust the tone and the
volume distribution for traffic an-
nouncements. For more informa-
tion, read the section on “Tone and
volume distribution”.

Traffic Information

This device is equipped with an RDS
EON receiver. EON means Enhanced
Other Network.
Whenever a traffic announcement (TA)
is made, the radio switches automati-
cally from a station that does not broad-
cast traffic information to one in the
chain of stations that does.
After the traffic announcement, the de-
vice returns to the station that was pre-
viously tuned in.

Switching Traffic Information
Priority On and Off

➮

Press the TRAF button,

?

.

Traffic announcement priority is activat-
ed if the traffic jam symbol is illuminat-
ed.

Note:
You will hear a warning tone

●

if you leave the reception area of a
traffic radio station to which you are
listening.

●

if, when you are listening to a cas-
sette, you leave the reception area
of the selected traffic radio station,
and the automatic search which
then follows fails to find a new traf-
fic radio station.

●

if you change from a traffic radio
station to a station with no traffic
information.

Either switch off the traffic information
priority, or change over to a station with
traffic information.

TRAFFIC INFORMATION

Advertising