Bissell 3130 - Manual (Page 5)

Dusting Brush
Stretch Hose
5
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
this user’s guide has been designed to help
you get the utmost satisfaction from your
Easy Vac. you’ll find assembly and operating
instructions, safety precautions, as well as
maintenance and troubleshooting instruc-
tions. please read this guide thoroughly before
assembling your vacuum cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate
and organize all parts before assembly. Familiarize
yourself with the parts and where they go.
Following this user’s guide will greatly enhance
your ability to get the most performance from
your vacuum for many years.
your vacuum comes in two, easy-to-assemble
components: the handle and the base.
1. Position the handle so the lower snap is
facing the back of the vacuum.
2. Line up the holes on the base with the snap
and knob on the handle.
3. Insert the handle into the base and push
until you hear it lock into place.
note: the handle is designed so only the
correct snaps will fit comfortably with the
holes in the base. Do not use excessive
force while assembling this vacuum. It
should fit together with ease.
4. Wrap power cord around cord wraps and
place attachments in their correct holders.
your vacuum assembly is now complete.
Handle position
press the detent lever with your foot to place
your vacuum in one of three positions.
1. Upright- For storage and transporting.
2. Normal Cleaning- Press detent lever once. Use for
most household floor cleaning tasks.
3. Low Cleaning- With the vacuum in normal
cleaning position, press detent lever again.
Use for reaching under low furniture, such
as tables, chairs, or beds.
H
ow to use this guide
A
ssembly
WaRnInG:
Do not plug in your vacuum
cleaner until you have
completely assembled it per
the following instructions
and are familiar with all
instructions and operating
procedures.
Handle
Lower Snap
Base
Dusting Brush
Crevice Tool
1.
2.
3.