Bissell 3130 - Manual (Page 7)

7
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Using your cleaner
1. Remove the plastic plug guard and dispose.
2. Unclip polarized plug from power cord.
3. Rotate the Quick Release cord wrap towards
floor and slip power cord from upper and lower
cord wraps.
4. Connect power cord plug to a polarized outlet.
5. To keep the power cord out of your way
while cleaning, place it in the cord hook by
the top of the vacuum.
Power Switch pedal
the red power switch pedal is located on the
back of the cleaner, under the cord wraps.
1. Step on the power switch to turn the unit
“On”. The rotating floor brush and suction
will start.
2. Step on the pedal again to turn the vacuum “Off”.
O
perations
Tip:
Before cleaning
under low furniture,
check for objects
that might block the
vacuum hose. Do
not pick up hard
or sharp objects
such as glass,
nails, screws, coins,
paper clips, etc.
with vacuum.
Power
Switch
Pedal
Quick
Release
Cord
Wrap
Cord
Hook