New Buck Corporation 261 - Manual (Page 6)

POSSIBLE TOOLS NEEDED FOR INSTALLATION
If you decide to install your own stove, there are several hand tools you may need to do the job.
If you do not already have them, they are readily available at most hardware stores.
Caulking gun
Large adjustable wrench (may not be needed)
Drop cloths or newspapers
Vacuum cleaner or whisk broom
Flashlight
1 tube of RTV silicone, Code 103 or 106, or high temperature rubber cement rated between
450
o F- 600 o F
7/32” drill bit and electric drill
Socket/Ratchet Set
Wrench
Electric Sawzall
INSTALLATION PREPARATION
1. Locate furniture and other materials away from the area stove will be to allow free access .
2. Cover the adjacent floor areas with the drop cloths to protect from soiling or marring the
surface.
3. If using an existing flue clean it of ashes and soot.
4. Check the flue for excessive build up of creosote or soot. Also, check for obstructions, such
as bird’s nests. If the flue is excessively dirty, clean it, or have someone clean it
professionally BEFORE installing or using the room heater.
5. If the flue is not used , seal off with metal or tightly packed non-combustible insulation .
4