Blaupunkt FRANKFURT RCM 169 - Manual (Page 21)

70
Switching the ignition connec-
tion on/off
Use IGN (ignition) to be able to switch the
car radio on and off with the ON button only
or with the ignition as well.
Switching on/off:
•
Press IGN, “Ign on” or “Ign off” will ap-
pear in the top line of the display.
• Use << / >> to switch on to off or off to
on.
• Press ENT to store this setting and re-
turn to the INSTALL menu.
Switching the internal output
stage on/off
Use AMP (amplifier) to switch the internal
output stage on or off. If an additional am-
plifier has been connected and only the
preamp outputs are being used, it is a good
idea to switch the internal amplifier off.
Switching on/off:
•
Press AMP, “Amp on” or “Amp off” will
appear in the top line of the display.
• Use << / >> to switch this setting to on
or off.
• Press ENT to store the new setting
and return to the INSTALL menu.
If you would like to alter the entry in a spe-
cific line,
•
press NEXT as often as required.
To complete your entry,
•
press ENT.
If the unit is switched on without the Key-
Card, this owner ID information will appear
in the top line of the display for approximately
8 sec.
Reset to default settings
“NORM (set)” will reset any settings you
have altered!
Exception: The stations stored on the sta-
tion presets will remain stored.
If you would like to reset to the default set-
tings,
•
press NORM and then press ENT for
approx. 2 sec.
First-time installation
Connecting external equipment
If external equipment is connected, you have
to switch AUX to on. The default setting for
AUX is off.
AUX will not appear as a menu item if a Blau-
punkt CD changer has been connected.
Closing the INSTALL menu
• Press EXIT.