Britax Marathon - Manual (Page 19)

Care and Maintenance Care and Maintenance
35 34
Buckle Removal
Fully recline the child restraint .
Locate the metal buckle-strap retainer
on bottom of the restraint .
Pull retainer away from child restraint
to loosen .
Turn the retainer so that the short side will go through the slot
in the restraint shell (Fig. A) .
Push the retainer through slots in the shell and cover, to the
front of the restraint .
Rethreading the Buckle
Locate the buckle slot .
Turn the buckle retainer so that the short side will go through
the slot in the cover and restraint shell (Fig. A) .
Pull buckle away from restraint until tight, then verify that the
strap is not twisted and the release button is facing outward .
1�
2�
3�
4�
5�
1�
2�
3�
Cleaning the Buckle
If a child eats and drinks while
in the restraint, the buckle may
need to be periodically checked
and cleaned of any accumulated
debris or dried liquids .
THOROUGHLY RINSE using
warm water (Fig. B) .
SOAK
(overnight if possible)
using warm water to loosen
hardened drinks or food .
TEST THE BUCKLE
by
fastening and unfastening until
a positive click is heard after
inserting the second buckle
tongue (Fig. C) . If a click is
not heard, repeat cleaning
procedure .
TOWEL DRY
DO NOT lubricate, use solvents, abrasive cleaners, soap or
household detergents .
•
•
•
•
•
A
B
C