Bissell ZING 22Q3 - Manual (Page 5)

w w w . b i s s e l l . c a 1 - 8 0 0 - 2 6 3 - 2 5 3 5
A
ssembly
1. Connect swivel hose by squeezing both
locking buttons and inserting it into the
suction opening on the canister. Once
the swivel hose is inserted in the suction
opening, release the locking buttons.
2. Connect telescoping extension wand to
the handle end of the flex hose.
3. Connect the floor nozzle foot onto the
telescoping extension wand.
4. Insert the combination crevice tool/
dusting brush tool into the holder.
5. To extend the telescopic tube, push the
black release button and then pull the
tube to the desired length.
NOTE: Shorten length of telescopic
tube for storage.
Special tools
Your BISSELL Zing canister is not only
a powerful carpet and rug vacuum
cleaner, it’s also a versatile bare floor
and above floor vacuum cleaner when
you select one of the special tools.
BareFloor tool
Use to vacuum carpets, rugs and bare
floors. Swivel head turns to get into
tight spaces and fits under cabinets.
1. To vacuum carpets and rugs, push the
brush switch to the carpet position .
This will pull the brushes up into the floor
nozzle.
2. To vacuum bare floors, push the brush
switch to the bare floor position .
This will extend the brushes down from
the floor nozzle.
Upholstery tool:
Use the upholstery tool to clean curtains,
draperies, cushions and fabrics.
Combination crevice tool/dusting brush:
Use the crevice tool in tight, narrow
spaces. Use the dusting brush to clean
curtains, draperies, cushions and fabrics.
WARNING:
Plastic film can be dangerous.
To avoid danger of
suffocation, keep away from
babies and children.
1.
4.
3.
5
O
perations
1.
2.
Brush Down
Brush Up
Tip:
Before cleaning
under low furni-
ture, check area
first for objects
that might harm
the unit or block
the hose.
Tip:
Hair, string and
small objects can
block the hose and
tools. Check them
occasionally for
obstructions.