Belkin F1DZ104T - Manual (Page 4)

Introduction
This sheet will guide you through the basic steps needed to install the
OmniView SE Plus Series KVM Switch (the Switch). If you have any problems
during installation, please refer to the SE Plus Series User Manual.
The following items are needed to install the SE Plus:
• OmniView SE Plus Series KVM Switch
• One (each) PS/2 keyboard, monitor, and mouse
• One KVM cable per computer installed
• One 12V DC, 1A power supply unit
Recommended Cable Kits:
F3X1105-XX PS/2 Style
F3X1835-XX-GLD PS/2 Style
F3X1962-XX USB Style
F3X1895-XX-GLD USB Style
F1D108-CBL Daisy-Chain Cable
(-XX denotes the length in feet)
P74183ea_F1DZ102-104_QIG.qxd 16-04-2003 10:01 Page 2