Warning, Aintenance and care, Disposal of batteries – Bissell 94V5 User Manual

Page 8

Advertising
background image

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

M

aintenance and care

8

disposal of batteries

if your Pet Hair eraser Hand Vac

is to be disposed of, the batteries

should be removed and disposed of

properly.

1.

iMPoRtant:

Remove from charging base and fully

discharge hand vacuum.

2.

Remove dirt container from handle.

3.

Remove (6) Phillips head screws on the

handle and cover.

4.

Separate left and right cover.

5.

Remove the entire battery assembly from

the cover.

6.

Remove (3) Phillips head screws

between the motor and battery bracket.

7.

Pull the motor, PCB, fuse, and inner

wire through the middle of the battery

bracket, separating the battery bracket

and both batteries from the motor, PCB,

and inner wire.

8.

Cut wires from the PCB and fuse to the

battery bracket.

9.

Keep Battery Pack together – DO NOT

separate individual batteries. For spe-

cific disposal instructions of batteries,

please contact RBRC (Rechargeable

Battery Recycling Corporation)

1-800-822-8837

or visit www.rbrc.com.

10.

Discard remainder of product

caution: Disconnecting the battery

will destroy the appliance and void the

warranty.

WaRning:

This product contains Nickel Metal Hydride (Ni-MH)

rechargeable batteries. According to Federal and State

regulations, removal and proper disposal of Ni-MH bat-

teries is required. For removal of the batteries in your

Pet Hair Eraser see instructions below.

TM

3.

6 screws

Advertising