Black & Decker TROS1500B User Manual

Page 4

Advertising
background image

6

5

GETTING STARTED
• Remove all packing material, labels and any stickers.
• Remove and save literature.
• Unpack mounting washers, screws and spacers for mounting and set them

aside in a safe place where they will not roll away or get lost.

Important: Do not attempt to operate appliance until it is properly installed.
CHOOSE A LOCATION
When choosing your location, consider the following:

DO make sure to mount within reach of an electrical outlet.

DO consider your normal work patterns in the kitchen when choosing

location.

DO NOT mount over any heating or cooking appliance such as your range or

oven.

DO NOT mount over or near a sink.

DO NOT mount under, in front of or behind any under-cabinet light fixtures.

Note: Do not install closer than 4 inches to any vertical surface or to any

horizontal surface beneath the unit.
Note: If you are mounting multiple †SpaceMaker™ appliances, they should not

be mounted flush to one another. Allow at least 4” of space between appliances

for adequate cooling.
Caution: This appliance features a Save-A-Plug™ outlet receptacle to connect

smaller †SpaceMaker™ appliances such as the mini food processor / grinder or

can opener. Do not use this outlet for any other appliance!
Caution: When selecting a location for your toaster oven, make sure you have

adequate room to reach the Rear Receptacle.
Note:
If you are connecting another †SpaceMaker appliance into the Save-A-

Plug™ outlet, make sure you can easily unplug the appliance after each use.
DETERMINE CABINET TYPE
Prior to taping the mounting template and beginning to drill your holes, determine

if your cabinet has a flat bottom

(B) or an overhanging lip (C). If your cabinet is

flat, follow STANDARD INSTALLATION; if the cabinet has a lip, refer to SPACER

MOUNTING INSTALLATION.

B

C

† 1. Mounting Parts

(Part # SDC-MOUNTING KIT)
16 Spacers

4 ½"

4 ¼"

4

3

/

16

"

4

1

/

16"

12 Screws

4 1"

4 1½"

4 2¼"
4 Washers
2. Mounting Template (in box)
† 3. Mounting Bracket

(Part # Part #SDCW-BRACKET)

A3

CONTROL PANEL
1. Temperature selector
2. Cooking function selector
3. Power ON indicator light
4. TOAST / TIMER selector
Important: When making toast or

using the TIMER function, always

turn the dial past 10 and then turn

back or forward to desired setting.

A2

Advertising