Liebherr LRH 100 - Manual (Page 2)

2 LRH 100
Concept and characteristics
• Automatic slack rope prevention
• Automatic slack rope preventionTransport fully assembled
with or without mounted hammer
• Completely self-rigging (no auxiliary machines required)
• Simultaneous control of several movements via Load-sen-
sing multi-circuit hydraulics
• Small rear swing radius
• Equipment design according to latest European regulations
and standards
• High manufacturing quality through quality control by PDE ®
system
• Evaluation and visualisation using the new Liebherr process
data report software (PDR)
• The LRH 100 is based on the well-proven
LB 20 basic machine
• Thanks to the special leader kinematics a radius of 28.7 ft
as well as a continuous inclination adjustment of 1:3 in all
directions is achieved
• The flexible hammer design offers the possibility of
mounting drop weights between 5,512 lbs and 15,435 lbs.
This guarantees optimum adaptation to the required
pile type
• A new joystick design allows for leader movements to be
carried out at all times and simultaneously to other machine
movements
• Automatic vertical leader alignment at the push
of a button
• Automatic parallel adjustment in both axes
Hydraulic hammer
Leader inclination device
Leader top for auxiliary rope
Leader
Leader ball joint
Pile guide
Undercarriage
Hammer winch
Radius adjustment device
Pile winch
Rope guide
Leader top
Auxiliary rope
Boom
Counterweight 26,455 lbs