Liebherr LRH 100 - Manual (Page 8)

8 LRH 100
Technical data
Hydraulic system
The main pumps are operated by a distributor gearbox. Axial piston
displacement pumps work in open circuits supplying oil only when
needed (flow control on demand). The hydraulic pressure peaks are
absorbed by the integrated automatic pressure compensation, which
relieves the pump and saves fuel.
Pumps for working tools 2x 63 gal/min
Separate pump for kinematics 36 gal/min
Hydraulic oil tank 159 gal
Max. working pressure 5076 PSI
The cleaning of the hydraulic oils occurs via an electronically monitored
pressure and return filter. Any clogging is shown on the monitor in the
cab. The use of synthetic environmentally friendly oil is also possible.
Swing
Swing ring with triple row roller bearing, external teeth and one swing
drive, fixed axial piston hydraulic motor, spring loaded and hydraulically
released multi-disc holding brake, planetary gearbox and pinion.
Selector for 3 speed ranges to increase swing precision.
Swing speed from 0 – 3.5 rpm is continuously variable.
Pile winch with free fall
Line pull (effective) 17,985 lbf
Rope diameter 20 mm
Rope speed 0-180 ft/min
The winches are noted for compact, easily mounted design.
Propulsion is via a maintenance-free planetary gearbox in oil bath.
Load support by the hydraulic system; additional safety factor by a
spring-loaded, multi-disc holding brake.
Crawlers
Propulsion through axial piston motor, hydraulically released spring
loaded multi-disc brake, maintenance-free crawler tracks, hydraulic
chain tensioning device.
Drive speed of telescopic undercarriage
0 – 1.1 mph
Track force 103,415 lbf
Width of 3–web–grousers 35.4 inch
Transport width 11´5´´
Control
The control system - developed and manufactured by Liebherr - is
designed to withstand extreme temperatures and the many heavy-
duty construction tasks for which this machine has been designed.
Complete machine operating data are displayed on a high resolution
monitor. A GSM/GPRS/GPS-modem allows for remote inquiry of
machine data and error indications. To ensure clarity of the information
on display, different levels of data are shown in enlarged lettering and
symbols.
Control and monitoring of the sensors are also handled by this high
technology system. Error indications are automatically displayed
on the monitor in clear text. The machine is equipped with electro-
hydraulic continuous proportional control for all movements, which can
be carried out simultaneously. Two joysticks are required for operation.
Pedal control can be changed to hand control.
Options:
• PDE: process data recording
• GSM/GPRS/GPS-modem
Noise emission
Noise emissions correspond with 2000/14/EC directive on noise
emission by equipment used outdoors.
Engine
Power rating according to ISO 9249, 270 kW (362 hp) at 2000 rpm
Engine type
Liebherr D 936 A7 SCR
Fuel tank 185 gal capacity with continuous level
indicator and reserve warning
Engine complies with NRMM exhaust certification EPA/CARB Tier 4i
or 97/68 EC Stage III B.
Hammer winch with free fall
Line pull (effective) 23,380 lbf
Rope diameter 24 mm
Rope speed 0-180 ft/min
The winches are noted for compact, easily mounted design.
Propulsion is via a maintenance-free planetary gearbox in oil bath.
Load support by the hydraulic system; additional safety factor by a
spring-loaded, multi-disc holding brake.