Liebherr TP 1760 Premium - Manual (Page 7)

- polythene bags and sheets
- polypropylene straps
- nailed wooden frame with polyethylene panel*
u Take the packaging material to an official collecting point.
4.6 Connecting the appliance
NOTICE
Risk of damage to the electronic control system!
u Do not use stand-alone inverters (conversion of d.c. to a.c./
three-phase) or energy saving plugs.
WARNING
Fire and overheating hazard!
u Do not use extension cables or multiple socket outlets.
The type of current (alternating current) and voltage at the
installation site have to conform with the data on the type plate
(see Appliance at a glance).
The socket must be properly earthed and fused. The tripping
current for the fuse must be between 10 A and 16 A.
The socket must be easily accessible so that the appliance can
be quickly disconnected from the supply in an emergency. It
must be outside the area of the rear of the appliance.
u Check the electrical connection.
u Plug in the power plug.
4.7 Switching on the appliance
u Press On/Off button Fig. 3 (1) .
w The appliance is switched on. The temperature display indi-
cates the set temperature.
w If “DEMO” is displayed, demo mode is activated. Please
contact the after sales service.
5 Control
5.1 Brightness of the temperature
display
You can adjust the brightness of the temperature display to the
light conditions of the room in which the appliance is installed.
5.1.1 Setting the brightness
The brightness is adjustable between h 0 (minimum bright-
ness) and h 5 (maximum brightness).
u Activate setting mode by pressing the SuperFrost* button
Fig. 3 (3) /SuperCool* button Fig. 3 (4) for approx. 5 sec.
w The Menu symbol is shown on the display, () .
w c flashes on the display.
u Use the adjustment button, Fig. 3 (2) , to select h .
u Briefly confirm with the SuperFrost* button Fig. 3 (3) /Super-
Cool* button Fig. 3 (4) .
w The display shows the last set brightness value.
u Use the adjustment button, Fig. 3 (2) , to set the desired
value from h 0 to h 5 .
u Briefly confirm the newly set brightness value with the
SuperFrost* button Fig. 3 (3) / SuperCool* button Fig. 3 (4) .
w h flashes on the display.
w The brightness is set.
u After making the change, deactivate setting mode: Press the
On/Off button Fig. 3 (1) once.
w The temperature display shows the temperature again.
If setting mode is already activated but you would like to keep
the old brightness value setting:
u Press the On/Off button Fig. 3 (1) twice to deactivate setting
mode.
w The temperature display shows the temperature again.
5.2 Child proofing
The child-proofing function enables you to make
sure that the appliance is not inadvertently switched
off by playing children.
5.2.1 Setting the child lock
To switch on the function:
u Activate setting mode: press SuperFrost* button Fig. 3 (3) /
SuperCool* button Fig. 3 (4) for approx. 5 seconds.
w The Menu symbol () is shown on the display.
w c flashes on the display.
u Briefly confirm with the SuperFrost* button Fig. 3 (3) /Super-
Cool* button Fig. 3 (4) .
w c1 appears in the display.
u Briefly confirm with the SuperFrost* button Fig. 3 (3) /Super-
Cool* button Fig. 3 (4) .
w The child lock symbol Fig. 3 (7) , lights up on the
display.
w c flashes on the display.
w The child lock function is switched on.
If setting mode is to be terminated:
u Briefly press the On/Off button Fig. 3 (1) .
-or-
u Wait for 5 minutes.
w The temperature display shows the temperature again.
To switch off the function:
u Activate setting mode: press the SuperFrost* button
Fig. 3 (3) /SuperCool* button Fig. 3 (4) for
approx. 5 seconds.
w The Menu symbol () is shown on the display.
w c flashes on the display.
u Briefly confirm with the SuperFrost* button Fig. 3 (3) /Super-
Cool* button Fig. 3 (4) .
w c0 appears in the display.
u Briefly confirm with the SuperFrost* button Fig. 3 (3) /Super-
Cool* button Fig. 3 (4) .
w The child lock symbol Fig. 3 (7) goes out.
w c flashes on the display.
w The child lock function is switched off.
If setting mode is to be terminated:
u Briefly press the On/Off button Fig. 3 (1) .
-or-
u Wait for 5 minutes.
w The temperature display shows the temperature again.
5.3 Refrigerator compartment
The natural circulation of air in the refrigerator compartment
results in zones differing in temperature. It is coldest directly
above the vegetable drawers and at the rear wall. It is warmest
at the top front of the compartment and in the door.
5.3.1 Food refrigeration
u Store perishable food such as ready-to-serve dishes, meat
products and sausages in the coldest zone. Place butter
and preserves in the upper area and in the door (see Appli-
ance at a glance).
Control
* Depending on model and options 7