2setting the temperature, 3supercool, 4shelves – Liebherr TP 1760 Premium User Manual

Page 8: 5using the sectioned shelf, 6door racks, Control

Advertising
background image

u

Use recyclable plastic, metal, aluminium and glass

containers and cling film for wrapping.

u

Always store liquids and food which is subject to odour or

taste transfer in closed containers or cover them.

u

Foods which give off a large amount of ethylene gas and

delicate foods, such as fruit, vegetables, salad, should

always be stored separately or wrapped so as not to reduce

the storage life; e.g. do not store tomatoes together with

kiwis or cabbage.

u

Do not store food too close together to enable good air

circulation.

u

To safeguard bottles from tipping over: move the bottle

holder.

5.3.2 Setting the temperature

The temperature depends on the following factors:

-

the frequency of opening the door

-

the room temperature of the installation location

-

the type, temperature and quantity of the food

Recommended temperature setting: 5 °C
An average temperature of approx. -18 °C is then established

in the freezer compartment.*
The temperature is changed sequentially. Once the 2 °C

setting is reached, the sequence starts again at 9 °C.

u

Call up temperature function: press the setting

button

Fig. 3 (2)

.

w

The previously-set value will flash in the temper-

ature display.

u

Change the temperature in 1 °C steps: Press the

setting button

Fig. 3 (2)

until the required

temperature is indicated in the temperature

display.

u

Change temperature continually: hold down

setting button.

w

During adjustment the value flashes on the

display.

w

The new setting is adopted approx. 5 seconds after the last

time the button was pressed and the set temperature is

again displayed. The temperature in the interior gradually

adjusts to the new value.

5.3.3 SuperCool*

With SuperCool you switch to the highest cooling

performance to reach lower cooling temperatures.

Use SuperCool, to rapidly cool large amounts of

food.
When SuperCool is activated, the appliance operates with

maximum cooling performance. The noise of the refrigeration

unit may be temporarily louder as a result.
The SuperCool function uses slightly more energy.
Cooling with SuperCool*
u

Briefly press SuperCool button

Fig. 3 (4)

.

w

The SuperCool symbol

Fig. 3 (9)

lights up in the display.

w

The cooling temperature drops to the coldest value.

SuperCool is activated.

w

SuperCool is automatically deactivated after 6 to12 hours

The appliance continues to operate in the energy-saving,

normal mode.

To prematurely deactivate SuperCool*
u

Briefly press SuperCool button

Fig. 3 (4)

.

w

The SuperCool symbol

Fig. 3 (9)

goes out in the display.

w

SuperCool is deactivated.

5.3.4 Shelves

Moving or removing shelves
The shelves have stops preventing them from being uninten-

tionally pulled out.

Fig. 9

u

Lift the shelf slightly and pull forward a little.

u

Adjust the height of the shelf. To do so, push the cut-outs

along the supports.

u

In order to remove the shelf fully, place it at a slant and pull

out towards the front.

u

Insert shelf with the raised edge pointing upwards at the

back.

w

The food does not freeze onto the rear wall.

Dismantling shelves
u

The shelves can be disman-

tled for cleaning.

5.3.5 Using the sectioned shelf

CAUTION

Danger of laceration!

The shelf may break. The broken fragments may cause lacera-

tion.

u

Remove only empty shelves.

Fig. 10

u

The glass shelf with stop face (2) has to be at the back.

u

The glass plate (1) with pull-out stops must be at the front so

that the stops (3) face downwards.

5.3.6 Door racks

Removing the storage rack

Fig. 11

Control

8

* Depending on model and options

Advertising