Liebherr PR 764 Litronic - Manual (Page 10)

Telescopic Handlers
10 Handling equipment for economical timber operation
Telescopic Handlers
TL 435-10 – TL 442-13
D E
C
A
F
B
G
Equipment Specification
Carriage with forks Length of the forks: 1,100 – 1,500 mm
Width: 1,200 – 2,000 mm
Log grap with hydraulic hold down device Length of the forks: 1,200 mm
Max. grapple opening: 1,740 mm
Grapple diameter: 1 m
3
Light-material bucket Width: 2,500 mm
Capacity: 1.5 m
3 – 4.0 m 3
Bucket with hydraulic grapple Capacity: 2 m 3
Straight or curved grapple
Equipment for wood handling
Dimensions
A Overall height (without rotating beacon) mm 2,395
B Overall width over standard tyres mm 2,400
C Height at rear mm 1,685
D Wheelbase mm 2,950
E Rear overhang mm 1,135
F Track gauge mm 1,985
G Outside turning radius over tyres mm 3,720
Ground clearance (mid-vehicle) mm 400
TL 435-10 TL 445-10 TL 435-13 TL 442-13
litronic ` litronic ` litronic ` litronic `
Engine power kW/HP 84/114 84/114 84/114 84/114
Max. lift capacity kg 3,500 4,500 3,500 4,200
Max. lift height m 9.8 9.8 13.0 13.0
Operating weight kg 8,900 9,600 9,800 10,900