Liebherr PR 764 Litronic - Manual (Page 17)

Handling equipment for economical timber operation 17
L 550 – L 580
Log Grapple
Log Grapple
L 550 L 556 L 566 L 576 L 580
Geometry
A20 Discharge height at 20° mm
A45 Discharge height at 45° mm
C Max. grapple opening in loading position mm
C1 Max. grapple opening mm
E Max height mm
F20 Reach at max. lifting height at 20° discharge mm
F45 Reach at max. lifting height at 45° discharge mm
F max. Max. outreach mm
H Height above cab mm
I Manipulation height mm
J Ground clearance mm
K Wheelbase mm
L Overall length mm
Width over tyres mm
Q Grapple diameter m 2
Grapple width mm
Payload * kg
Operating weight * kg
Tyre sizes
* The figures shown here are valid with tyres above, includes all lubricants, a full fuel tank, the ROPS/FOPS cab and the operator. Different tyres
and optional equipment will change the operating weight and tipping load.
** Data with rear tyres filled with water
IND = Industrial lift arm with parallel guidance including hydraulic quick coupler (only available for L 550 and L 556)
ZKK = Z-bar linkage with tilt ram support and hydraulic quick coupler (“Holzknecht”)
IND IND ZKK ZKK ZKK
3,590 3,570 3,400 3,400 3,630
3,020 2,950 2,700 2,700 2,880
2,350 2,690 3,000 3,000 3,370
2,465 2,960 3,300 3,300 3,650
6,320 6,480 7,500 7,500 7,800
1,740 1,890 2,340 2,340 2,230
1,410 1,530 1,770 1,770 1,660
2,670 2,820 3,260 3,260 3,340
3,365 3,365 3,580 3,580 3,580
4,530 4,530 5,200 5,200 5,400
530 530 565 565 565
3,280 3,280 3,580 3,580 3,700
8,500 8,650 9,600 9,600 9,980
2,660 2,660 2,930 2,930 2,930
1.8 2.4 3.1 3.1 3.5
1,600 1,600 1,800 1,800 1,800
6,300** 6,400** 8,200** 8,650** 9,200**
18,890** 19,550** 25,980** 26,790** 27,850**
23.5R25 L4 23.5R25 L4 26.5R25 L4 26.5R25 L4 26.5R25 L4
C
A 45
A 20
I
E
Q
F max.
L
K
H
J
F 20
F 45
20°
20°
45°
Q
C 1