Liebherr L 538 - Manual (Page 16)

Loading Bucket L 524 L 528 L 538 L 542
Geometry
Bucket type
Cutting tools
Lift arm length
ft in
Bucket capacity according to ISO 7546 ** yd 3
Bucket width ft in
A Dumping height at max. lift height ft in
B Dump-over height ft in
C Max. height of bucket bottom ft in
D Max. height of bucket pivot point ft in
E Max. operating height ft in
F Reach at max. lift height ft in
G Digging depth ft in
H Height above cab ft in
I Height above exhaust ft in
J Ground clearance ft in
K Wheelbase ft in
L Overall length ft in
Turning circle radius
over outside bucket edge
ft in
Breakout force (SAE) lbf
Tipping load, straight * lb
Tipping load, articulated at 40° * lb
Operating weight * lb
Tire sizes
* The figures shown here are valid with tires above and include all lubricants, a full fuel tank, the ROPS/FOPS cab and the operator. Different tires
and optional equipment will change the operating weight and tipping load. (Tipping load, articulated at 40° according to ISO 14397-1)
** Actual bucket capacity may be approx. 10% larger than the calculation according to ISO 7546 standard. The degree to which the bucket can
be filled depends on the material – see page 21.
GPB = General purpose bucket (Rehandling bucket)
STD-QC = General purpose bucket (Rehandling bucket) for hydraulic quick coupler
LMB
= Light Material Bucket ZK = Z-bar linkage
T = Welded-on tooth holder with add-on teeth BOCE = Bolt-on cutting edge
ZK ZK ZK ZK ZK ZK ZK ZK ZK ZK ZK ZK
GPB STD-QC LMB GPB STD-QC LMB GPB STD-QC LMB GPB STD-QC LMB
T T BOCE T T BOCE T T BOCE T T BOCE
7’10” 7’10” 7’10” 7’10” 7’10” 7’10” 8’2” 8’2” 8’2” 8’2” 8’2” 8”2”
2.7 2.4 3.1 3.0 2.7 3.9 3.4 3.0 4.6 3.7 3.3 5.2
8’2” 8’2” 8’2” 8’2” 8’2” 8’10” 8’2” 8’2” 8’10” 8’2” 8’2” 8’10”
9’4” 8’11” 8’9” 9’1” 8’10” 8’4” 9’4” 9’ 8’7” 9’3” 8’11” 8’3”
10’11” 10’11” 10’11” 10’11” 10’11” 10’11” 11’5” 11’5” 11’5” 11’5” 11’5” 11’5”
11’7” 11’7” 11’7” 11’7” 11’7” 11’7” 12’1” 12’1” 12’1” 12’1” 12’1” 12’1”
12’5” 12’5” 12’5” 12’5” 12’5” 12’5” 12’11” 12’11” 12’11” 12’11” 12’11” 12’11”
16’2” 16’3” 16’11” 16’4” 16’6” 17’2” 17’2” 17’6” 18’2” 17’3” 17’8” 18’4”
2’10” 3’1” 3’6” 3’2” 3’3” 3’8” 3’4” 3’5” 3’10” 3’ 4” 3’7” 4’2”
3” 3” 3” 3” 3” 3” 3” 3” 3” 3” 3” 3”
10’6” 10’6” 10’6” 10’6” 10’6” 10’6” 10’8” 10’8” 10’8” 10’8” 10’8” 10’8”
9’5” 9’5” 9’5” 9’5” 9’5” 9’5” 9’7” 9’7” 9’7” 9’7” 9’7” 9’7”
1’6” 1’6” 1’6” 1’6” 1’6” 1’6” 1’7” 1’7” 1’7” 1’7” 1’7” 1’7”
9’4” 9’4” 9’4” 9’4” 9’4” 9’4” 9’9” 9’9” 9’9” 9’9” 9’9” 9’9”
22’5” 22’9” 24’1” 22’9” 23’1” 23’9” 23’5” 23’11” 24’11” 23’8” 24’1” 25’3”
18’8” 18’9” 18’11” 19’
19’1” 19’2” 19’11” 20’ 20’1” 19’11” 20’2” 20’4”
20,460 18,435 15,285 20,010 18,210 15,285 26,305 24,505 22,705 25,630 23,155 19,110
18,740 17,415 16,380 21,075 19,070 18,715 23,590 22,485 21,100 25,575 23,600 22,930
16,535 15,430 14,420 18,740 17,020 16,555 20,945 19,840 18,565 22,485 20,945 20,060
22,930 23,810 24,470 24,030 24,910 25,355 28,220 29,100 29,540 29,540 30,425 30,865
17.5R25 L3 17.5R25 L3 20.5R25 L3 20.5R25 L3
16 L 524 – L 542
Dimensions
Z-bar linkage
L0004.01
L
J
K
I
H
E
A
D
G
C
B
F
45°