4disposing of packaging, 5connecting the appliance, 6switching on the appliance – Liebherr TX 1021 Comfort User Manual

Page 6: 5control, 1refrigerator compartment, 1food refrigeration, 2setting the temperature, 3door racks, 4removing the bottle holder, 2ice box

Advertising
background image

4.4 Disposing of packaging

WARNING

Danger of suffocation due to packing material and plastic film!

u

Do not allow children to play with packing material.

The packaging is made of recyclable materials:

-

corrugated board/cardboard

-

expanded polystyrene parts

-

polythene bags and sheets

-

polypropylene straps

-

nailed wooden frame with polyethylene panel*

u

Take the packaging material to an official collecting point.

4.5 Connecting the appliance

NOTICE

Risk of damage to the electronic control system!

u

Do not use stand-alone inverters (conversion of d.c. to a.c./

three-phase) or energy saving plugs.

WARNING

Fire and overheating hazard!

u

Do not use extension cables or multiple socket outlets.

The type of current (alternating current) and voltage at the

installation site have to conform with the data on the type plate

(see Appliance at a glance).
The socket must be properly earthed and fused. The tripping

current for the fuse must be between 10 A and 16 A.
The socket must be easily accessible so that the appliance can

be quickly disconnected from the supply in an emergency. It

must be outside the area of the rear of the appliance.

u

Check the electrical connection.

u

Plug in the power plug.

4.6 Switching on the appliance

Put the appliance into operation about 2 hours before first

loading food to be frozen.
u

Turn the temperature control

Fig. 3 (1)

to the right, from the

0 setting to point 3.

w

The interior light is on.

5 Control

5.1 Refrigerator compartment

The natural circulation of air in the refrigerator compartment

results in zones differing in temperature. It is coldest directly

above the vegetable drawers and at the rear wall. It is warmest

at the top front of the compartment and in the door.

5.1.1 Food refrigeration

u

Store perishable food such as ready-to-serve dishes, meat

products and sausages in the coldest zone. Place butter

and preserves in the upper area and in the door (see Appli-

ance at a glance).

u

Use recyclable plastic, metal, aluminium and glass

containers and cling film for wrapping.

u

Always store liquids and food which is subject to odour or

taste transfer in closed containers or cover them.

u

Foods which give off a large amount of ethylene gas and

delicate foods, such as fruit, vegetables, salad, should

always be stored separately or wrapped so as not to reduce

the storage life; e.g. do not store tomatoes together with

kiwis or cabbage.

u

Do not store food too close together to enable good air

circulation.

u

To safeguard bottles from tipping over: move the bottle

holder.

5.1.2 Setting the temperature

The temperature can be set between the first point (warmest

temperature, minimum cooling performance) and "max."

(coldest temperature, maximum cooling performance).
The middle control setting is recommended, then a middle

temperature of approx.5 °C is established in the refrigerator

compartment.

u

Turn the temperature control

Fig. 3 (1)

.

The temperature depends on the following factors:
- the door opening frequency

- the room temperature at the site where the appliance is

installed

- the type, temperature and quantity of frozen food

u

Adjust the temperature as needed, using the control.

5.1.3 Door racks

Removing the storage rack
u

Remove storage rack according to

illustration.

Dismantling door racks

u

The door racks can be dismantled for cleaning.

5.1.4 Removing the bottle holder

u

Remove the bottle holder according

to the illustration.

5.2 Ice box

The ice box is used to store perishable foodstuffs or frozen

foods for short periods, and for making ice cubes.

Control

6

* Depending on model and options

Advertising