Liebherr LTM 1200-5.1 - Manual (Page 2)

PN 1200-5.1_D-GB/F/I/ESP/RUS 03.07.2007 10:09 Uhr Seite 2
Probedruck
C M Y CM MY CY CMY K
11 2 LTM 1200-5.1 LTM 1200-5.1
4000
13298
15282
60
3865 5034
8899
3483 5396
R = 5450
R = 11010
R = 11850
5500 6230 8300
R = 4850
3000
20° 17°
12 t 12 t 12 t 12 t 12 t 16.00 R 25
Compact, maneuverable and
weight-optimized The LICCON test system
• The test system assists the servicing personnel in quickly
localizing failures of the crane sensory system without the
need of measuring instruments
• The service starts on the display screen, troubleshooting
becomes a matter of minutes
• Occurring errors are indicated by error codes and error
descriptions on the display screen
• Convenient interactive functios permit the observation of all
inputs and outputs of the entire system by different
representations on the display screen even during crane
operation. It equally visualizes the allocation of the individual
sensors and actuators of the system and their functions
The LICCON work area
limitation system
• It relieves the crane operator, especially in situations where
the handling of loads requires his full attention, by controlling
the work area limits. Work areas can be restricted by buildings,
bridges, roofs, high-tension power lines, pipe lines or adjacent
cranes. The automatic work area limitation system (optional),
can easily be programmed. Four different limitation functions
are practicable:
• Height limitation of the pulley head
• Radius limitation
• Slewing angle limitation
• Limitation of edges
The LICCON work planner
• The LICCON work planner consists of a software program
on CD for planning, simulation and documentation of crane
applications on the display screen (optional)
• The 2D planner program enables the drawing of buildings,
to write texts and to represent a crane model true to scale
including the entire motions within a fictional
construction site
• The work planner permits the preparation of more transparent
offers, facilitates the briefing of crane operators and can be
run on a Laptop at the construction site
• Powerful, 6-cylinder Liebherr turbo-charged Diesel engine
type D846 A7, 370 kW/503 h.p, exhaust gas emissions
correspond to the directives 97/68/EG stage 3 and EPA/CARB
Tier 3, robust and reliable, modern, electronically controlled
engine management
• ZF power shift gear with automated control system AS-
TRONIC. ZF intarder fitted directly to the gear unit, 12 forward
and 2 reverse gears, automated control, reduced fuel
consumption due to a great number of gears
• 2-step, robust transfer case with lockable transfer differential,
creeping speed 0.78 km/h
• Drive 10 x 6, axles 2, 4 and 5 driven
• Drive 10 x 8 (optional), axles 2, 4 and 5 driven,
axle 1 activatable for off-road displacement
• Weight-optimized, robust axles of minor maintenance, perfect
track keeping and lateral stability due to special arrangement
of the steering knuckles, steel- and rubber mounted
• Maintenance-free cardan shafts; easy and quick fitting due
to 70° diagonal toothing
• Hydropneumatic suspension "Niveaumatik",
program-controlled for "setting crane on outriggers",
"crane displacement with equipment" and for
"road displacement of the crane",
suspension travel +150/-150 mm
• Lateral force released and maintenance-free suspension
rams, protected against damage by synthetic pipes
• Sustained-action brakes:
Engine brake as exhaust retarder with Liebherr additional
brake system (ZBS), Intarder on gear, Telma-type eddy
current brake (optional)
• Service brake:
All axles fitted with air disc brakes, high braking performance,
long maintenance intervals, rapid-change brake linings
Modern drive concept
• Overall length 15.28 m, carrier length 13.3 m
• Large overhang angles of up to 20°
• Smallest turning radius of 11.01 m with all-wheel steering
• Rear counterweight radius only 4.85 m
• 60 t total weight incl. drive 10 x 8, tyre size 16, hook block
31.2 t (axle load 5 x 12 t)
• 3 optional tyre sizes
14.00 R 25 carrier width 3 m
16.00 R 25 carrier width 3 m
20.5 R 25 carrier width 3.1 m