Liebherr LTM 1200-5.1 - Manual (Page 4)

PN 1200-5.1_D-GB/F/I/ESP/RUS 03.07.2007 10:09 Uhr Seite 4
Probedruck
C M Y CM MY CY CMY K
9 4 LTM 1200-5.1 LTM 1200-5.1
700
LSB -
LSB -
LSB -
CAN -
SCI -
• Variable supporting basis
Outriggers retracted
Supporting basis 5.5 m x 8.9 m
Supporting basis 8.3 m x 8.9 m
• Fix-mounted supporting pads with splash guard
• Travel of supporting ram of up to 700 mm
• Level control of the outriggers, all-automatic levelling of the
crane during the supporting procedure by "push-button"
• 2 x 9° lateral inclination of crane and crane superstructure
• Control panels at either side of the carrier with membrane
keyboard and electronic inclination indicator, push-buttons
for ENGINE/START/STOP and speed control are illuminated
and lockable
• Operation of the outrigger system in accordance with the
rules for the prevention of accidents
• Illumination of the supporting area by 4 incorporated
projectors
Setting crane on outriggers –
quick, convenient and safe
• Modern, comfortable driver’s cab of high functionality and
convincing design, corrosion resistant, sheet steel version,
cataphoretic dip-primed, front mounted on rubber shock
absorbers, rear cushioned hydraulically, internal sound and
heat absorbing panelling
• Safety glass all-round, greenish tinted front and side windows
for heat absorption, electric window lifters
• Arrangement of the control elements and displays according
to ergonomical aspects for safe and convenient handling
during continuous operation
• Digital display and keyboard units interconnected with the
functional blocks by data bus technology
• Driver’s seat cushioned pneumatically, with pneumatic lumber
support, headrest
• Steering wheel adjustable in height and inclination
• Heatable and electrically adjustable rear mirrors
• Safety belts for driver and co-driver
• 3 windscreen wipers with automatic wipe/wash system and
intermittent control
• Delayed switch-off of the interior lights
• Various racks and stackers
• Radio preparation
Comfortable driver’s cab of
high functionality
Legend:
LSB - Liebherr system bus 1
LSB - Liebherr system bus 2
LSB - Liebherr system bus 3
CAN - Busses
SCI - Serial Communication Interface
1 Input/output module for control of the suspension, Liebherr
Diesel engine, automatic transmission, control functions,
pneumatic control of brake functions
1a Instruments keyboard unit in driver’s cab
2 Input/output module for differential locks, display functions
2a Instruments keyboard unit in driver’s cab
3 Input/output module for outrigger system - right
3a Control unit for outrigger system - right
4 Input/output module for outrigger system - left
4a Control unit for outriggers system - left
5 Input/output module for engine brake, cruise controller, speed
setter, electronic control of Diesel engine (steering column
switch right) and automatic transmission
6 Control of Liebherr Diesel engine/carrier and automatic
transmission
7 Inclination sensor for automatic levelling
8 Slewing sensor in slipring unit
9 Connection of Liebherr system bus (LSB 1, 2, 3, 4)
10 LICCON central unit
11 LICCON monitor in crane cab
12 Length sensor and cable drum/energy cable for interlocking
gripper/telescopic boom
13 Inductive sensors (12 x)
14 Angle sensor on base section
15 Cable drum for items 16, 17, 18 and for luffing jib
16 Wind sensor
17 Hoist limit switch
18 Angle sensor
19 Input/output module for electronic control of Diesel
engine/superstructure, air flap, ventilator clutch, exhaust flap
20 Control injection pump – Liebherr Diesel engine/superstructure
21 Control lever
22 Pressure sensor (4 x) for output management and LMB (safe
load indicator)
23 Steering valve for active rear-axle steering
LSB 2
CAN-Bus
9
20
21 21
12
14
19
11
10
13
4 CAN-Bus
LSB 4
4a