BenQ SP831 - Manual (Page 17)

Positioning your projector 17
3. Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you select.
Take into consideration the size and position of your screen, the location of a suitable power
outlet, as well as the location and distance between the projector and the rest of your
equipment.
The projector is designed to be installed in one of four possible installation locations.
*To set the projector position:
1. Press MENU on the projector or remote control and
then press / until the System Setup menu is
highlighted.
2. Press / to highlight Projector Position and press
/ until the correct position is selected.
1. Floor Front
Select this location with the projector placed
near the floor in front of the screen. This is
the most common way to position the
projector for quick setup and portability.
2. Ceiling Front
Select this location with the projector
suspended upside-down from the ceiling in
front of the screen.
Purchase the BenQ Projector Ceiling
Mounting Kit from your dealer to mount
your projector on the ceiling.
*Set Ceiling Front after you turn the
projector on.
3. Ceiling Rear
Select this location with the projector
suspended upside-down from the ceiling
behind the screen.
Note that a special rear projection screen
and the BenQ Projector Ceiling Mounting
Kit are required for this installation
location.
*Set Ceiling Rear after you turn the
projector on.
4. Floor Rear
Select this location with the projector placed
near the floor behind the screen.
Note that a special rear projection screen is
required.
*Set Floor Rear after you turn the projector
on.
Language
Splash Screen
My Screen
Projector Position
Blank Timer
Auto Off
Sleep Timer
Background Color
Menu Settings
Input Source
System Setup
Analog RGB
English
BenQ
Disable
Auto Source Search
EXIT Back
Disable
Disable
Blue
On
Floor Front