BenQ SP831 - Manual (Page 72)

72 Maintenance
Resetting the lamp timer
12. After the startup logo, press MENU and then
press /
until the Advanced Setup menu is
highlighted.
13. Press to highlight Lamp and press ENTER.
The Lamp page displays.
14. Highlight Reset Lamp Timer and press ENTER. A
warning message displays asking if you want to
reset the lamp timer. Highlight Reset and press
ENTER. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this
could cause damage.
Lamp
Audio
Pattern
High Altitude Mode
Password
Key Lock
Reset All Settings
Advanced Setup
EXIT Back Analog RGB
ENTER
Off
Lamp
Lamp Power
Lamp Hours
ENTER
EXIT Back
Reset Lamp Timer
Reset Lamp Timer?
Reset Cancel
WARNING
Normal