Buffalo Technology Buffalo AirStation WLI2-PCI-G54S - Manual (Page 6)

6
3. Configuring Wireless Zero Configuration
Service:
◗
If the Wireless Zero Configuration Service
is activated, Windows will scan for available
wireless access points once the Wireless
PCI Adapter is properly installed. If Windows
detects one or more access points, a network-
ing icon appears on the task bar. One or more
wireless networks are available appears as a
caption accompanying the icon.
■
Note: If the Wireless Zero Configuration Ser-
vice is not functioning, select Start>Control
Panel>Administrative Tools>Services. Select
Automatic in the Startup Type field of Wire-
less Zero Configuration Service to enable
the Wireless Zero Configuration Service. The
default value of Wireless Zero Configuration
Service is Automatic.
◗ Right click the networking icon in the taskbar
and select View Available Wireless Networks to
display a list of available wireless networks.
Select an access point network name or SSID and
click the Connect button to establish a connec-
Introduction