Buffalo Technology Buffalo AirStation WLI2-PCI-G54S - Manual (Page 8)

8
Introduction
◗ To configure a WEP/WPA encryption key, select
the appropriate wireless network and click the Con-
figure button.
◗ From the pull down menu, select the appropriate
Network Authentication and Data Encryption for the
wireless network. Enter and confirm the Network
Key and Key Index. Click the OK button when
finished.
■
Note: Buffalo Technology recommends that
users of the Wireless Zero Configuration Service
upgrade to the latest version freely available at:
http://www.microsoft.com.
For advanced support in using Window’s XP’s
Wireless Zero Configuration Service, refer to the
Buffalo Support Web Site: http://www.buffalotech.
com/wireless/support
Skip to Page 12 if you are not using Windows XP or prefer not to use Windows
XP's Wireless Zero Configuration Service.