Bose 18 - Manual (Page 18)

18
System Installation
English
Connecting the system to power
Connect the two AC power (mains) cords in the following order:
1. Plug the small end of the Acoustimass ® module power cord into the AC power jack on the
connector panel of the Acoustimass module (Figure 16). Plug the other end of the power
cord into an AC (mains) outlet.
2. Turn the Acoustimass module POWER switch to on ( l ).
Figure 16
Power connection of the
Acoustimass module
Figure 17
Power connection of the
media center
CAUTION: For dual voltage units, make sure the voltage setting on the bottom of the media
center power supply matches the local power rating. Check with local electrical authorities if
you are not sure about appropriate power rating.
Plug the small round connector of the media center power supply cable into the DC POWER
jack on the back of the media center (Figure 17). Insert the power supply line cord connector
into the power supply and plug the cord into an AC (mains) outlet.
OUTPUTS T
O
CUBE SPEAKERS
AUDIO INPUT
POWER
FRONT
SURROUND
100-120/200-240V
AC
50/60 Hz 350W MAX.
L C R
L R
Connector panel
Power switch
DC power jack
Power supply
Rear panel