Bose 18 - Manual (Page 19)

19
System Installation
English
Installing the remote control batteries
Slide the battery compartment cover off of the back of the remote. Find the polarity markings
(+ and –) inside the compartment and install the four batteries accordingly. Slide the cover
back on the remote and snap it closed.
Replace the batteries when the remote control stops operating or its range seems reduced.
Alkaline batteries are recommended.
Note: Do not change the settings of the factory-preset miniature switches. See your Operat-
ing Guide for information on how to prevent conflicts with other LIFESTYLE ® music systems.
Figure 18
Remote control battery
installation
Finishing the installation
• Setup Disc 1 verifies that your system’s speakers
are connected correctly and ensures complete per-
formance from your new system.
• Play these discs after you have set up your system and made all of the connections. Allow
approximately 20 minutes to complete the process. You may want to do it when the acous-
tic measurements will not disturb anyone else.
+
+
+
+
Battery
compartment
cover
Four (4) AAA (IEC-LR3)
batteries
Setup Disc 1
ADAPTiQ headset
Setup Disc 2
Note: The ADAPTiQ audio
calibration system may not be
included with your LIFESTYLE
®
system. Contact your Bose ®
dealer.
• Setup Disc 2 leads you through the ADAPTiQ™ audio calibration process, which tailors
the sound of your LIFESTYLE ® system to the acoustics of your listening area.
ADAPTiQ audio calibration system
• The special headset, referred to by Setup Disc 2, enables you to take acoustic
measurements in your room during the ADAPTiQ audio calibration process. Put
it on only when the disc indicates.