Blaupunkt LONG BEACH DVD35 - Manual (Page 22)

22
Playing a DVD with a different region
code is not possible.
This device can be used to play the
following data carriers/data formats:
● DVD video and DVD audio.
DVD-MP3/WMA.
● Video CD (VCD).
● MP3/WMA CDs, see the chapter
“MP3/WMA mode”.
● Audio CDs, see the chapter “CD
mode”.
License
Manufactured under license of Dolby
Laboratories. “Dolby”, “Pro Logic” and
the double-D symbol are trademarks
of Dolby Laboratories.
This product contains technologies that
are copyright-protected under certain
US-American patents. The copyrights
are property of Macrovision Corpora-
tion and other copyright owners. The
use of this copyright-protected technol-
ogy must be approved by Macrovision
Corporation and is intended exclusively
for private use and other presentations
in a limited scope, unless Macrovision
Corporation first issued a respective
permission.
Switching to DVD mode
If there is no DVD inserted in the
drive,
➮
switch on the device by pressing
button
1.
➮
Press the button 2.
The control panel opens.
➮
Gently insert the DVD with its
printed side pointing up into the
drive until you feel some resist-
ance.
The drive draws in the DVD automati-
cally.
You must not hinder or assist the drive
as it draws in the DVD.
➮
Gently close the control panel
whilst exerting a little pressure un-
til you feel it click into place.
The DVD data are loaded.
Dependent upon the inserted DVD, the
playback starts or the DVD menu dis-
plays.
If a DVD is already inserted in the
drive,
➮
press the SRC button ; on the
device or the SOURCE button ;
on the remote control repeatedly
until “DVD” appears on the display.
Playback begins from the point at which
it was last interrupted.
DVD OPERATION
01LongBeachDVD35_gb 11.07.2005, 14:38 Uhr 22