Blaupunkt LONG BEACH DVD35 - Manual (Page 58)

58
➮
Press the or button
6 re-
peatedly until the equalizer band
that you want to configure
(“LOW1”, “LOW2”, “HIGH1”,
“HIGH2” or “HIGH3”)
appears on the display.
➮
Press the MENU•OK button 7.
➮
Press the or button
6
repeatedly until the frequency
that you want is displayed.
➮
Press the MENU•OK button
7.
The top line displays the GAIN and
the quality factor “Q”. The gain setting
flashes. You can use the quality fac-
tor to adjust the width of the filter. The
higher you set the value for the qual-
ity factor the more directly the filter will
be applied to the selected frequency.
To adjust the gain,
➮
press the or button 6.
To adjust the quality factor,
➮
press the button
6.
The quality factor setting flashes.
➮
Press the or button
6
repeatedly until the setting that
you want is displayed.
EQUALIZER
Note:
Please note that you can boost or
reduce one frequency in each
equalizer band. Proceed in the
way described above with all the
equalizer bands that you want to
adjust.
➮
Press the MENU•OK button 7
and then the DIS•ESC button
5
repeatedly or the DEQ button
8.
The settings are saved.
01LongBeachDVD35_gb 11.07.2005, 14:39 Uhr 58