BT PaperJet 60E - Manual (Page 41)

41
To adjust the duration of the phone call
alert beeps
When your PaperJet 60E is set to
PHONE/FAX RX mode it automatically
answers all calls. If it is a phone call, it is set
to beep for 20 seconds to alert you to pick
up the handset. You can adjust the duration
of these beeps.
Press until the display shows INSTALLATION
Display shows TEL.LINE SET-UP
Press until the display shows FAX/TEL
TIMER:20
Press to switch between the options of 15 ,
20 , 30 and 40 seconds.
Press to confirm the option displayed.
To return to standby.
Receiving a fax call via an extension phone
(Remote Start)
If you answer a call on an extension phone connected
to the same line as your PaperJet 60E and you hear
fax tones, you can switch your PaperJet 60E into fax
receive mode by dialling
✱ 5. This is like pressing
the Start button.
When you hear your PaperJet 60E respond with its
own fax tones, hang up the extension phone.
You can replace the 5 of this code with any digit
from 0-9.
To switch remote start off/on
Press until the display shows INSTALLATION
Press until the display shows REMOTE
START: ON
Press to switch between ON and OFF.
Press to confirm the setting.
Press to return to standby.
To change the remote start code
Press until the display shows INSTALLATION
Press until the display shows REMOTE
START: ON
Press to switch between ON and OFF.
Press Start to confirm the setting.
Display shows TYPE CODE *5
Enter the new digit you want after the ✱
Note that the ✱ cannot be changed.
Press Start to confirm the setting.
To return to standby.
/
PaperJet 60e_se 6-06-2003 16:51 Pagina 41