BT PaperJet 60E - Manual (Page 42)

To adjust the volume of the buzzer
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Display shows VARIOUS SETTINGS
Press until the display shows BUZZER VOL.LOW
Press to switch between HIGH , MEDIUM , LOW
and OFF .
Press to confirm the option displayed.
To return to standby.
To switch the fax tones on and off
Your machine will automatically play
dialling tones and fax connection tones over
the loudspeaker so that you can hear the
progress of the call. You can switch the
tones on and off.
Press until the display shows
INSTALLATION
Display shows TEL.LINE SET-UP
Until the display shows DIAGNOSTICS
Press until the display shows LINE
MONITOR: ON
Press to switch between ON and OFF . If you
select OFF , you will not hear the dialling and
fax connection tones.
Press to confirm the option displayed.
To return to standby.
42
To adjust the loudspeaker volume
While the machine is in standby
Display shows TYPE NUMBER .
Press to raise or lower the volume.
To adjust the speed a fax is sent at
Your PaperJet 60E is set to send faxes at
14400bps. If you consistently fail to send
faxes to a particular number it might help
to reduce the transmission speed to
9600bps or 4800bps.
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Display shows VARIOUS SETTINGS
Press until the display shows TX SPEED 14.4
Press to switch between 14.4 , 9.6 and 4.8 .
Press to confirm the option displayed.
To return to standby.
PaperJet 60e_se 6-06-2003 16:51 Pagina 42