5 using the appliance, 1 brewing coffee – Philips Pure Essentials Kaffeemaschine User Manual

Page 7

Advertising
background image

7

D

Note:

If you want to use Aroma Control to

determine the right balance between ground

coffee and water, do not use a permanent

filter. Due to its weight, a permanent

filter disrupts the coffee-water balance of

Aroma Control.

7

Open the filter holder lid and put a paper

filter in the filter holder (Fig. 13).

8

Put pre-ground coffee (filter-fine grind) in the

filter until the Aroma Control indicator is in

the OK position and close the filter holder

lid (Fig. 14).

9

Press the on/off button to switch on the

appliance.

The red power-on light goes on.

10

When all the water has passed through

the filter, you can remove the jug from the

appliance.

B

Warning:

If you remove the jug for more than

30 seconds before all the water has passed

through the filter, the filter may overflow.

HD7692: the appliance switches off

automatically after brewing. The thermos jug

keeps the coffee hot.

HD7690/HD7686: the coffee is kept hot

on the hotplate as long as you leave the

appliance switched on.

11

hD7690/7hD7686: press the on/off button

to switch off the appliance after use.

The appliance switches off automatically after

2 hours.

12

Remove the filter holder (Fig. 15).

13

Throw away the paper filter. (Fig. 16)

14

let the appliance cool down for at least 3

minutes before you start brewing coffee again.

3

To close the lid, turn it to the left by its fin

until the arrow on the jug points towards the

‘closed/brewing’ symbol on the lid (Fig. 10).

4

To remove the lid from the thermos jug, turn

it to the left by its fin until the arrow on the

jug points towards the ‘remove lid’ symbol on

the lid (Fig. 11).

5 Using the appliance

5.1 Brewing coffee

This coffee maker is equipped with Aroma

Control, which allows you to adjust the strength of

the coffee to your own taste. Aroma Control also

helps you determine the right balance between

pre-ground coffee and water.

D

Note:

When you use Aroma Control, always fill the

water tank with water before you put ground

coffee in the filter.

1

Make sure the plug is in the wall socket.

2

Make sure the glass jug or thermos jug (with

the lid in the ‘closed/brewing’ position r) is

under the filter holder.

3

set the coffee strength you prefer with the

Aroma Control knob. (Fig. 12)

To increase the coffee strength, turn the

knob to the right. To decrease the coffee

strength, turn the knob to the left.

D

Note:

When you set the coffee strength, make sure

that the filter holder is in the appliance.

4

Remove the water tank and fill it with fresh,

cold tap water (Fig. 6).

The level indications correspond to cups of

120ml.

5

Put the water tank back onto the appliance

properly (Fig. 7).

The Aroma Control indicator moves upwards.

6

Take a paper filter (type 1x4 or no. 4) and

fold the sealed edges to prevent tearing and

folding.

EN

gl

Ish

4222_200_0052_3_DFU-Redesign_A5_v1.indd 7

5/23/13 8:49 AM

Advertising