Philips Saeco Incanto Kaffeevollautomaten - Manual (Page 37)

This function enables the user to see how many coffees the
machine has already dispensed.
TOT
AL
COFFEE
PROGRAMMING MACHINE FUNCTIONS
This is a factory-set function that automatically switches the
machine into “Standby” when 3 hours have elapsed since a
coffee was dispensed. TIMER
RINSING CYCLE
The switch-off time can be adjusted, in 15-minute intervals,
to a minimum of 15 minutes; the function cannot be
deactivated.
The display will show the
number of coffees the
machine has dispensed.
Press “ESC” to exit the
menu.
When the function ap-
pears, select it using the
“OK” button.
Use the buttons to adjust
the timer setting.
When the function ap-
pears, select it using the
“OK” button.
Press the “OK” button to
confi rm your choice.
This function is used to rinse all the coffee-dispensing parts
with water.
Fill the tank with fresh drinking water.
The rinsing cycle cannot be interrupted.
A person must be present during this operation.
Warning: a large quantity of water may be discharged from the
coffee brew unit. Before starting, empty out the drip tray and
keep an additional container handy.
The machine will carry out
a rinsing cycle.
When the cycle is
completed this message
will be displayed:
When the function ap-
pears, select it using the
“OK” button.
TOTAL COFFEES *
TIMER
TOTAL COFFEES
2
TIMER *
CLOCK
STANDBY
AFTER 3:00
STANDBY
AFTER 1:15
RINSING CYCLE *
FACTORY SETTINGS FILL WATERTANK
TOTAL COFFEES
2
RINSING CYCLE
ENGLISH
37