Philips SHAVER Series 9000 Nass- und Trockenrasierer - Manual (Page 17)

Activating the travel lock
1 Press the on/off button for 3 seconds to enter
the travel lock mode.
, While you activate the travel lock, the travel lock
symbol lights up white continuously. When the
travel lock is activated, the shaver produces a
sound and the travel lock symbol flashes.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
, The travel lock symbol flashes and then lights up
continuously.
The shaver is now ready for use again.
Note: You can also deactivate the travel lock by
connecting the appliance to the mains.
Replacing shaving heads
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
- The appliance is equipped with a replacement
reminder which reminds you to replace the
shaving heads. The replacement reminder lights up
white continuously and the arrows flash white. You
hear a beep to indicate you have to replace the
shaving heads.
Note: After replacing the shaving heads, you need to
reset the shaver by pressing the on/off button for
7 seconds.
ENGLISH 17