Vitek VT-1372 - Manual (Page 7)

7
ously and remove the external
shaving block (2) (Pic. 4).
- Using the brush (10), clean the
inside and outside of the shaving
block (2), and also, the internal cut-
ting blocks (3) (Pic. 5, 6).
- Replace the external shaving block,
attach the protective cap and store
the shaver in the travel case.
Wet cleaning
Regular wet cleaning can help you
keep the shaver in good condition,
preserve a high level of shaving ability
and prevent unpleasant odors or bac-
teria growth.
- Without removing the external
shaving block, apply a small
amount of liquid soap to the shav-
ing head.
- Turn on the shaver and pour a little
water onto the external shaving
screen. After 10-20 seconds, turn
off the shaver.
- Remove the screen and wash
under running water.
- Wash the internal cutting blocks
(Pic. 7) under water.
- Dry the shaver completely with a
clean cloth. Do not attach the pro-
tective cap (1), so the external
shaving screen can dry.
REPLACING SHAVING SYSTEM
COMPONENTS
To preserve the cutting ability of the
shaver, it is recommended to replace
the external shaving screen once a
year - no less, and the internal cutting
block - every two years.
Replacing the external shaving
screen
- Press the buttons (4) and remove
the external shaving block (2).
- Remove the shaving screen from
the inside of the shaving block. This
requires a small sharp object (like a
small flat-head screwdriver) to
remove the edge of the screen from
the holder on the shaving block
(Pic. 8).
- Install the new shaving screen into
the inside of the shaving block.
Make sure that the screen is secure
on all four sides (Pic. 9).
Replacing the internal cutting
block
- Remove the external shaving block
(2).
- Remove the internal cutting block
by lifting upwards.
- Install a new internal cutting block.
PROTECTING THE ENVIRONMENT
This shaver contains rechargeable
batteries.
Before disposing of the expired elec-
tric shaver, remove the batteries and
dispose of them according to the laws
of your country for disposal of harmful
waste.
Do not throw the shaver away until you
remove the built-in rechargeable bat-
teries.
WARNINGS
• Do not charge the batteries in
places where the temperature is
lower than 0°Ñ or higher than 40°Ñ,
or they are exposed to direct sun-
ENGLISH
Vt-1372.qxd 21.01.05 17:30 Page 7