English – Vitek VT-1372 User Manual
Page 8
light, near heat sources or places
with high levels of humidity.
Only use the charging device that
came with the shaver.
Dry the shaver fully before con-
necting the charging device.
Keep the charger away from water
and do not attempt to touch it with
wet hands.
Store the charger in a dry and safe
place; protect it from damage.
The external shaving screen is very
thin; it can be easily damaged if not
cared for properly. To avoid injury,
do not use the shaver if he external
shaving screen or the internal cut-
ting blocks are damaged.
Wash the shaver under the tap. Do
not use salty or boiling water for
this purpose. Do not using cleaners
intended for plumbing and kitchen
use. Do not put the shaver in water
for long periods of time.
Do not open the shaver body
because you might ruin its water-
proofing.
If the shaver isn't working properly,
take it to an authorized service cen-
ter.
Only use the shaver for the purpos-
es intended, as instructed in these
instructions.
Do not use the charger in places
where it can accidentally get
bumped into the bathtub or sink.
This product is designed for domestic
use only.
TECHNICAL CHARACTERISTICS
Charger:
Power supply
220V ~ 50Hz
Output voltage
~3.5V
Shaver:
Power requirements 3Wt
The manufacturer reserves the right
to change the device characteristics
without prior notice.
Service life - no less than 3 years.
GUARANTEE
Details regarding guarantee condi-
tions can be obtained from the dealer
from whom the appliance was pur-
chased. The bill of sale or receipt must
be produced when making any claim
under the terms of this guarantee.
This product conforms to
the EMC-Requirements as
laid down by the Council
Directive 89/336/EEC and
to the Low Voltage
Regulation (73/23 EEC)
8
ENGLISH
Vt-1372.qxd 21.01.05 17:30 Page 8